Kenwood DNX690HD Instruction Manual - Page 15

Return to the Top page DVD, VCD DVD Setup You can set up the DVD playback functions. NOTE • Each operation in this section can be started from the Top Menu screen. For details, see Operating with the Top Menu Screen (P.14). 1 Touch [ ] in the control screen. Multi function menu appears. 2 Touch [SETUP]. SETUP Menu screen appears. 3 Touch [Source]. Source SETUP Menu screen appears. 4 Touch [DVD SETUP] in the list. DVD SETUP screen appears. 5 Set each item as follows. Menu/Subtitle/Audio Language* See Language setup (P.29). Dynamic Range Control* Sets the dynamic range. Wide: The dynamic range is wide. Normal: The dynamic range is normal. Dialog (Default): M akes the total sound volume larger than other modes. This is effective only when you are using Dolby Digital software. Angle Mark Sets an angle mark display. ON (Default): An angle mark appears. OFF: An angle mark does not appear. Screen Ratio* Sets the screen display mode. 16:9 (Default): Displays wide pictures. 4:3 LB: D isplays wide pictures in the Letter Box format (having black stripes at the top and bottom of screen). 4:3 PS: Displays wide pictures in the Pan & Scan format (showing pictures cut at the right and left ends). Parental Level* See Parental level (P.29). DISC SETUP See Disc setup (P.30). Stream Information Displays the present source information. The stream (Dolby Digital, dts, Linear PCM, MPEG, WMA or AAC) appears. * T hese items are disabled when a DVD is being played. Language setup This setting is for the language used in the menu, subtitle, and voice. You cannot setup these items during DVD playback. 1 Touch [SET] of the desired item; [Menu Language], [Subtitle Language], [Audio Language]. Language Set screen appears. 2 Enter the desired language code and touch [Enter]. Return to the Top page DVD, VCD Parental level Sets a parental level. You cannot setup this item during DVD playback. 1 Touch [SET] of [Parental Level]. Parental Pass screen appears. 2 Enter the parental code and touch [Enter]. Parental Level screen appears. NOTE • To cancel the setup and return to the previous screen, touch [Cancel]. • To clear the entered code, touch [Clear]. • Current parental level appears as [Level#]. 3 Touch [2] or [3] to select a parental level. Sets the entered language and returns to the DVD SETUP screen. NOTE • To cancel the setup and return to the previous screen, touch [Cancel]. • To clear the entered code, touch [Clear]. • To set the DVD's original language for audio language, touch [Original]. NOTE • If a disc has higher parental lock level, you need to enter the code number. • The parental lock level varies depending on a loaded disc. • If a disc has no parental lock, anybody can play it back even when you have set the parental lock. 28 29