Kenwood DNX690HD Instruction Manual - Page 44
Setting Up, Monitor Screen Setup, View Camera Control  , System Setup - parking brake
View all Kenwood DNX690HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Return to the Top page Setting Up Setting Up Monitor Screen Setup You can adjust image quality in iPod video, picture file, menu screen, etc. 1 Touch the lower left area of any screen for at least 1 second. Mode (Playback screen only) Select screen mode. Full: Full picture mode Just: Justify picture mode Zoom: Zoom picture mode Screen Control screen appears. 2 Adjust each item as follows. Normal: Normal picture mode NOTE • Adjusting items are different depending on the current source. • You can perform this function only when you have applied the parking brake. • The image quality can be set for each source. Bright/Tint/Color/Contrast/Black/ Sharpness Adjusts each item. Dimmer Select dimmer mode. ON: The display and buttons dim. OFF: The display and buttons do not dim. SYNC (Default): Turns the dimmer function on or off when the vehicle light control switch is turned on or off. NAV-SYNC: Turns the dimmer function on or off according to the Navigation Day/Night display setting. 86 View Camera Control You can set up display when a CMOS-300 Series view camera is used. 1 Press the button for 1second. Camera view screen appears. 2 Adjust each item as follows. Return to the Top page Setting Up System Setup NOTE • Each operation in this section can be started from the multi function menu. 1 Touch [Menu] on any screen. TOP Menu screen appears. 2 Touch [SETUP]. 3 Touch [System]. 1 2 3 1 Guideline Touching each time turns on or off the guideline display alternately. 2 Switching the View Camera Touching each time changes between the front view camera and rear view camera. 3 Angle Touching each time changes camera angles in the following order: Super wide view/ Wide view/ Overhead view/ Wide view + Top view/ Corner view NOTE • The video camera controls described above may not be operable depending the connected cameras. System Menu screen appears. See the following section for each setting. • Set up the user interface (P.88) • Adjust touch panel (P.89) • Set up external switch (P.90) • Set up memory (P.90) 87