Kenwood DNX690HD Instruction Manual - Page 54

Zone Control - user manual

Get Kenwood DNX690HD PDF manuals and user guides View all Kenwood DNX690HD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

Return to the Top page Audio Setting Up Operation Controlling EQ curves 1 Select EQ curve from [Natural], [Rock], [Pops], [Easy], [Top40], [Jazz], and [User] using [2] and [3]. Controlling equalizer manually 1 Touch [Tone] in the Equalizer screen. 2 Set each item as follows. Controlling SystemQ-Ex Selects items to be adjusted for tone curve setup. If you turn off this setting, only Level can be set up for tone curves. 1 Touch [ON] or [OFF] of [SystemQ-Ex]. FREQ Adjusts the center frequency for each range. Setting values are as follows. Bass: 60Hz/70Hz/80Hz/100Hz/110Hz/120Hz/ 130Hz/150Hz (Default is "100Hz".) Middle: 5 00Hz/1kHz/1.5kHz/2kHz (Default is "1kHz".) Treble: 10kHz/12.5kHz/15kHz/17.5kHz (Default is "12.5kHz".) LEVEL Adjusts the level of each range. Each setting value is within -8dB and 8dB and default is "0dB". Q Factor Adjust Q value for bass and middle. Setting values are as follows. Bass: 1.00/1.25/1.50/2.00 (Default is "1.00".) Middle: 1.00/2.00 (Default is "1.00".) Bass DC EXT Turns Bass DC EXT on or off. Default is "OFF". If you select "ON", the bass center frequency is extended to the low register by approximately 20%. [Flat] Tone level becomes 0 (flat). Subwoofer Level Adjusts the subwoofer volume. This setting is not available when subwoofer is set to "OFF". See Speaker setup (P.101). 106 Zone Control You can select different sources for both front and rear positions in the vehicle. 1 Touch [Zone Control]. Return to the Top page Audio Setting Up [3] (Front Source, Rear Source) Select the audio source for each. [∞], [5] (Rear VOL.) Adjusts the rear channel volume. [Single Zone] Touch to turn off the dual zone function. NOTE • When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source. • When the dual zone function is set to on, the following functions are not available. • Output from the subwoofer • Subwoofer Level/Bass Boost (P.104) • Equalizer Control/Space Enhancer /Listening Position (P.105, 108, 110) • DSP Bypass Control Setup/Car Type Setup (P.103, 101, 102) /Speaker Zone Control screen appears. 2 Touch [Dual Zone]. 3 Set each source as follows. 107

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
106
106
107
Return to the Top page
Audio Setting Up
Return to the Top page
Audio Setting Up
Operation
Controlling EQ curves
1
Select EQ curve from [Natural], [Rock],
[Pops], [Easy], [Top40], [Jazz], and
[User] using [
2
] and [
3
].
Controlling SystemQ-Ex
Selects items to be adjusted for tone curve
setup. If you turn off this setting, only Level
can be set up for tone curves.
1
Touch [ON] or [OFF] of [SystemQ-Ex].
Controlling equalizer manually
1
Touch [Tone] in the Equalizer screen.
2
Set each item as follows.
FREQ
Adjusts the center frequency for each range.
Setting values are as follows.
Bass:
60Hz/70Hz/80Hz/100Hz/110Hz/120Hz/
130Hz/150Hz (Default is “100Hz”.)
Middle:
500Hz/1kHz/1.5kHz/2kHz (Default is
“1kHz”.)
Treble:
10kHz/12.5kHz/15kHz/17.5kHz (Default
is “12.5kHz”.)
LEVEL
Adjusts the level of each range.
Each setting value is within -8dB and 8dB and
default is “0dB”.
Q Factor
Adjust Q value for bass and middle.
Setting values are as follows.
Bass:
1.00/1.25/1.50/2.00 (Default is “1.00”.)
Middle:
1.00/2.00 (Default is “1.00”.)
Bass DC EXT
Turns Bass DC EXT on or off. Default is “OFF”.
If you select “ON”, the bass center frequency is
extended to the low register by approximately
20%.
[Flat]
Tone level becomes 0 (flat).
Subwoofer Level
Adjusts the subwoofer volume. This setting is
not available when subwoofer is set to “OFF”.
See
Speaker setup (P.101)
.
Zone Control
You can select different sources for both
front and rear positions in the vehicle.
1
Touch [Zone Control].
Zone Control screen appears.
2
Touch [Dual Zone].
3
Set each source as follows.
[
3
] (Front Source, Rear Source)
Select the audio source for each.
[
∞
], [
5
] (Rear VOL.)
Adjusts the rear channel volume.
[Single Zone]
Touch to turn off the dual zone function.
NOTE
•
When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
•
When the dual zone function is set to on, the
following functions are not available.
•
Output from the subwoofer
•
Subwoofer Level/Bass Boost
(P.104)
•
Equalizer Control/Space Enhancer
/Listening Position
(P.105, 108, 110)
•
DSP Bypass Control
/Speaker
Setup/Car Type Setup
(P.103, 101, 102)