Kenwood DNX690HD Instruction Manual - Page 49
Camera Setup, Software Information, 4 [TEL Key Longer than 1 Second] must - software update
View all Kenwood DNX690HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Return to the Top page Setting Up Camera Setup You can set camera parameters. 1 Touch [Menu] on any screen. 2 Touch [SETUP]. SETUP Menu screen appears. 3 Touch [Camera]. Camera SETUP screen appears. 4 Set each item as follows. 96 Rear Camera*1 Selects the type of rear camera to use. CMOS-3xx: When the CMOS-300 series with ID 1 set is connected. Other (Default): When the other camera is connected. R-CAM Interruption Sets a method for switching the display. Setting values are ON and OFF. ON: Switches to the rear view camera video display when shifting to reverse or pressing the or button for 1 second. OFF (Default): Switches to the rear view camera video display when pressing the or *4 button for 1 second. R-CAM Settings*2 Adjusts the CMOS-300 series with ID 1 set. For details, see the instruction manual of your camera. Front Camera*1 Selects the type of front camera to use. CMOS-3xx: When the CMOS-300 series with ID 2 set is connected. Other: When the other camera is connected. OFF (Default): When the front camera is not used. F-CAM Settings*3 Adjusts the CMOS-300 series with ID 2 set. For details, see the instruction manual of your camera. *1 T hese settings become settable only when the parking brake is on. *2 T his setting becomes settable only when the parking brake is on and the CMOS-300 series is selected. *3 T his setting becomes settable only when the parking brake is on and "Front Camera" is set to [ON]. *4 [ TEL Key Longer than 1 Second] must be set to "R-CAM". See User interface (P.88) Software Information Check the software version of this unit. 1 Touch [Menu] on any screen. 2 Touch [SETUP]. SETUP Menu screen appears. 3 Touch [Software]. Software Information screen appears. 4 Confirm the software version. Touch [Update] as necessary. NOTE • For how to update the software, see the relevant update procedure manual which comes with the software. Return to the Top page Setting Up 97