Kenwood DNX690HD Instruction Manual - Page 26
USB/iPod/DivX Setup, Navigate, Device select, Station list screen
View all Kenwood DNX690HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Return to the Top page CD, Disc, iPod, USB device Device select You can display a Device select screen for device selection. 1 Touch [ ] in the control screen. The Device select screen appears. Station list screen You can perform the following functions from this screen. Device selection Bluetooth: Uses the Android smartphone connected via Bluetooth for an Aha connection. Wired: Uses the iPhone connected via the KCA-iP202 or KCA-iP102 (optional accessory) for an Aha connection. NOTE • If you touch [ ] when no device has been connected, a popup screen that allows device selection only appears. Selects the station Touch the station name in the list. NOTE • You cannot select iPod as rear source when you select Aha as main source in dual zone function. • An iPhone connected via Bluetooth cannot be used for an Aha connection. • If the volume of Aha received by a Bluetooth device is too low, raise it on the Bluetooth device. Navigate Sets the location information received from Aha at the destination of navigation. 1 Touch [ ] in the control screen. [ ] Saves the location information. [Go!] Sets the location information at the destination and starts navigation. Return to the Top page CD, Disc, iPod, USB device USB/iPod/DivX Setup You can perform setup when using USB/ iPod/ DivX (DNX890HD/ DNX7700BT/ DNX5700BT). NOTE • Each operation in this section can be started from the Top Menu screen. For details, see Operating with the Top Menu Screen (P.14). 1 Touch [ ] in the control screen. Multi function menu appears. 2 Touch [SETUP]. SETUP Menu screen appears. 3 Touch [Source]. Source SETUP Menu screen appears. 4 Touch [USB], [iPod] or [DivX] in the list. Each setup screen appears. See the following section for each setting. • USB setup (P.52) • iPod setup (P.52) • DivX(R) VOD (P.53) 50 51