Kodak 8437477 User Guide - Page 46
Connecting the printer to a standard telephone line, Line-In, Rings to Answer, EXT-Out
UPC - 041778437476
View all Kodak 8437477 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Setting Up Your Printer NOTE: Check with your cable television provider to make sure you can send and receive faxes over your digital telephone service. Connecting the printer to a standard telephone line If you have a dedicated phone line that does not receive any voice calls, connect your printer to the Line-In on the printer as described below. 1. Connect one end of the phone cord supplied with your printer to your telephone wall jack and the other end to the port labeled Line-In. 2. When the phone rings your printer is set to answer automatically after the number of rings set in the Rings to Answer setting. See Specifying rings to answer, page 40. 3. If you use an answering machine, connect your answering machine plug into the port labeled EXT-Out on your printer. Set the number the of rings on your answering machine to a lower number of rings than the Rings to Answer settings on your All-in-One printer. If you are using a dedicated telephone line to send or 38 www.kodak.com/go/aiosupport