Kodak ESP9 User Manual - Page 112
Unsupported authentication or encryption type, Invalid WEP Key, Probable Cause 5, Corrective Action
UPC - 041771349479
View all Kodak ESP9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Troubleshooting Probable Cause 5 The wireless settings on the printer do not match the wireless settings of your access point. Corrective Action Print a network configuration page to compare the wireless settings of the printer with the wireless settings for your access point. Change either the device or access point settings so that both the printer and the access point have matching wireless settings. Probable Cause 6 You entered the wrong mode (ad hoc or infrastructure) or security type. Corrective Action Enter the correct mode or security type. Print a network configuration page to compare the wireless settings of the printer with the wireless settings for your access point. Change either the device or access point settings so that both the printer and the access point have matching wireless settings. Probable Cause 7 MAC filtering is enabled on your access point. Corrective Action Keep MAC filtering enabled, but change the settings to allow the access point to communicate with the printer. Unsupported authentication or encryption type Probable Cause Your network is configured with an authentication protocol not supported by the Kodak All-in-One printer. Corrective Action Open the Embedded Web Server of your access point and change the security settings. Use one of the supported protocol types. Note: Types not supported include WPS, WPA2-Enterprise, LEAP, PEAP, EAPMD5, EAP-TLS, and EAP-TTLS. Invalid WEP Key Probable Cause 1 An invalid WEP key was entered. 104 Kodak ESP 9 Printer User Guide