Konica Minolta AccurioPress C14000 Watkiss PowerSquare 224 Offline User Manual - Page 102
Calculating Creep Adjustment, Example, Positive creep.
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
- - Image Creep Calculating Creep Adjustment 1. Measure the thickness of the set, before booklet-making. (i.e. the number of sheets of paper multiplied by the thickness of the paper) 2. The spine thickness of the finished booklet is two times the set thickness 3. The pages need to be incrementally adjusted by the spine thickness. Depending on the job, this can be achieved by: Positive creep adjustment Move the pages on the outermost sheet away from the spine. The innermost sheet is not adjusted. This is sometimes called a positive creep, or pull-out. Negative creep adjustment The outermost sheet is not adjusted. Move the pages on the inner sheets towards the spine. This is sometimes called a negative creep, or push-in. Balanced creep adjustment The adjustment is balanced between the inside and outside pages. Example • The book is 40 sheets of 80gsm paper. • The set thickness is measured at 4mm. • The spine thickness is therefore 8mm. Positive creep. Adjust the pages incrementally so that the front page and back page are both moved 8mm away from the spine. Negative creep. Adjust the pages incrementally so that the inside pages are both moved 8mm towards the spine. Balanced adjustment. Adjust the pages incrementally so that the inside pages are both moved 4mm towards the spine and the front and back page are both moved 4mm away from the spine. 98 Watkiss PowerSquare™224 User Manual