Konica Minolta AccurioPress C14000 Watkiss PowerSquare 224 Offline User Manual - Page 75

Change the Fuses - Book Stacker, Introduction, WARNING, Fuse Description, Procedure, Result

Get Konica Minolta AccurioPress C14000 PDF manuals and user guides View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

5 - Error Conditions, Problems and Solutions - Change the Fuses - Book Stacker Change the Fuses - Book Stacker Introduction The Book Stacker has two fuses at the power input connector. See Figure 5 on page 6. If either fuse is broken, the Book Stacker will not operate. WARNING: Turn OFF the machine and remove the mains power supply cable before you change the fuses. This machine uses two fuses in parallel. WARNING: To avoid the risk of fire, replace fuses using only the same type and rating. Fuse Description • 3A, HRC Quick acting, F • Part Number 730-017 Procedure 1. Turn OFF the Book Stacker. 2. Disconnect the Book Stacker from the power supply. 3. Check each fuse. 4. If the fuse is broken then replace with a fuse of the correct specification. Result If the fuse breaks again, then call your Watkiss service engineer. . Watkiss PowerSquare™224 User Manual 71

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
5 - Error Conditions, Problems and Solutions - Change the Fuses - Book Stacker
Watkiss PowerSquare™224 User Manual
71
Change the Fuses - Book Stacker
Introduction
The Book Stacker has two fuses at the power input connector.
See Figure 5 on
page 6.
If either fuse is broken, the Book Stacker will not operate.
WARNING:
Turn OFF the machine and remove the mains power supply
cable before you change the fuses.
This machine uses two fuses in parallel.
WARNING:
To avoid the risk of fire, replace fuses using only the same type
and rating.
Fuse Description
•
3A, HRC Quick acting, F
•
Part Number 730-017
Procedure
1.
Turn OFF the Book Stacker.
2.
Disconnect the Book Stacker from the power supply.
3.
Check each fuse.
4.
If the fuse is broken then replace with a fuse of the correct specification.
Result
If the fuse breaks again, then call your Watkiss service engineer.
.