Konica Minolta AccurioPress C14000 Watkiss PowerSquare 224 Offline User Manual - Page 49
Open the PSQ main deck. See Lift the PowerSquare Main Deck on See Install New
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
5 - Error Conditions, Problems and Solutions - Book Quality Problems Is the number of STITCHES set between 1 and 6? Yes No Select STITCHES 1 - 6. See "STITCHES" on page 18. Check the stitch-wire spool. Is there stitch-wire present? Yes No Load a new stitch-wire spool. See "Install New Stitch-wire" on page 88. Open the PSQ main deck. See "Lift the PowerSquare Main Deck" on page 30. Pull approximately 100-150mm of stitch-wire from the stitch wire spool. See Figure 22 on p.44. Does the wire move freely? Yes No Open the stitch-wire cabinet. Discard any tangled wire and reload the stitch-wire spool. See "Install New Stitch-wire" on page 88. Check the stitch head for stitch-wire jams. See Figure 23 on p.44. Is the stitch head clear of stitch-wire jams? Yes No Clear the stitch-wire jam. See "Clear a Stitch-wire Jam" on page 65. Lubricate the stitch head. See "Lubricate the Stitch Head" on page 83. Does the problem continue? Yes No Further action is not needed. Call your service engineer Watkiss PowerSquare™224 User Manual 45