Konica Minolta AccurioPress C14000 Watkiss PowerSquare 224 Offline User Manual - Page 87

Lubricate the Stitch Head, When to do, Materials needed, CAUTION, Initial Procedure

Get Konica Minolta AccurioPress C14000 PDF manuals and user guides View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 87 highlights

6 - Maintenance - Lubricate the Stitch Head Lubricate the Stitch Head When to do • When the message OPERATOR MAINTENANCE is displayed on the screen. • When a new stitch-wire is installed if this interval is shorter. Materials needed • Klüber Isoflex NBU15 Grease, 50g • Air duster CAUTION : Only use the grease shown in this manual. Correct lubrication extends the performance and service life of the stitch head. Other types of grease do not protect the stitch head. Only apply the grease as shown. If you apply additional grease, the paper gets marked. Initial Procedure FIGURE 44. Trim the nozzle of the tube of grease Step 1 Action Trim the first 2.5mm from the nozzle. Information See Figure 44 on page 83 2 Remove the cap from the tube of grease. 3 Fit the nozzle to the tube of grease. Watkiss PowerSquare™224 User Manual 83

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
6 - Maintenance - Lubricate the Stitch Head
Watkiss PowerSquare™224 User Manual
83
Lubricate the Stitch Head
When to do
•
When the message
OPERATOR MAINTENANCE
is displayed on the screen.
•
When a new stitch-wire is installed if this interval is shorter.
Materials needed
•
Klüber Isoflex NBU15 Grease, 50g
•
Air duster
CAUTION :
Only use the grease shown in this manual.
Correct lubrication
extends the performance and service life of the stitch head. Other types of
grease do not protect the stitch head.
Only apply the grease as shown. If you apply additional grease, the paper
gets marked.
Initial Procedure
FIGURE 44.
Trim the nozzle of the tube of grease
Step
Action
Information
1
Trim the first 2.5mm from the
nozzle.
See Figure 44 on page 83
2
Remove the cap from the tube of
grease.
3
Fit the nozzle to the tube of
grease.