Konica Minolta AccurioPress C14000 Watkiss PowerSquare 224 Offline User Manual - Page 65
Close the PowerSquare, See
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
5 - Error Conditions, Problems and Solutions - Paper Jams Step Action Information 3 Loosen the trimmer infeed The procedure can be seen from the top of conveyor. the machine. See Figure 25. Access to the parts is through the former clamp mechanism. See Figure 26. Hold the shaft and push to the right, against spring pressure to disengage the shaft from the drive pin. Lift the left hand end clear. 4 Remove the book, if one is found. 5 Remove any paper offcuts Look down through the former clamp. See from the trimmer infeed Figure 26. conveyor. Small pieces of paper trimmings can cover the jam sensor and cause an error message. 6 Fit the trimmer infeed con- Look down through the former clamp. veyor. • Insert the right hand end of the shaft into the bearing, against the spring pressure. • Rotate the trimmer infeed conveyor, so that the green belts are vertical. • Insert the left hand end, so that the shaft engages with the drive pin. 7 Fit the trim bin. 8 Close the PowerSquare main deck and covers. Watkiss PowerSquare™224 User Manual 61