Konica Minolta AccurioPress C14000 Watkiss PowerSquare 224 Offline User Manual - Page 23
NUMBER, PRESSURE, THRESHOLD, SET THICKNESS, PAPER SIZE, Button, spine is always formed.
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
3 - The User Interface - The BASIC Window Button - NUMBER - PRESSURE - THRESHOLD TRIM - AUTO Information Touch NUMBER to select how many times the form roller processes the spine. The available options are 1, 2, 3 or 4. An increase in NUMBER increases the time taken to form the spine and can decrease the production rate for thin books. Alternatively, increase the PRESSURE. Touch PRESSURE to increase or decrease the pressure used to form the spine. Touch + to increase the amount of spine form. Touch - to decrease the amount of spine form. The range is -9 to +9. The default setting is 0. Use THRESHOLD to choose if a square spine is formed. If the SET THICKNESS value is thinner than the THRESHOLD value, a square spine is not formed. If the SET THICKNESS value is thicker than the THRESHOLD value, a square spine is formed. If the SET THICKNESS value is 1.5mm or thicker, a square spine is always formed. The default value is 0.8mm. The allowed range is 0.1mm to 1.5mm The trim dimension is calculated automatically according to the PAPER SIZE and SET THICKNESS. If needed, the trim dimension can be changed. Touch TRIM to adjust the size of the finished book after the fore-edge is trimmed. The maximum trim is 28 mm. The trim function can be turned off. Touch AUTO to select the default trim position. Watkiss PowerSquare™224 User Manual 19