Konica Minolta AccurioPress C14000 Watkiss PowerSquare 224 Offline User Manual - Page 94
Install the Stitch-wire into the Stitch Head, between the felt wire-cleaning
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
6 - Maintenance - Install New Stitch-wire Install the Stitch-wire into the Stitch Head Step 1 2 Action Information Pull the stitch-wire from the end of the stitch-wire guide. Make sure the stitch-wire runs behind the gas-strut. 3 Feed the end of the stitch-wire between the felt wire-cleaning pads. Felt Wire-Cleaning Pads 4 Push the stitch-wire into the stitch- wire guide block. Push stitch-wire in direction of arrow 5 Push the stitch-wire as far as pos- sible. Make sure the stitch-wire runs between the wire feed rollers and into the middle wire tube. 90 Watkiss PowerSquare™224 User Manual
6 - Maintenance - Install New Stitch-wire
90
Watkiss PowerSquareâ„¢224 User Manual
Install the Stitch-wire into the Stitch Head
Step
Action
Information
1
Pull the stitch-wire from the end of
the stitch-wire guide.
2
Make sure the stitch-wire runs
behind the gas-strut.
3
Feed the end of the stitch-wire
between the felt wire-cleaning
pads.
4
Push the stitch-wire into the stitch-
wire guide block.
5
Push the stitch-wire as far as pos-
sible.
Felt Wire-Cleaning Pads
Push stitch-wire in direction of arrow
Make sure the stitch-wire runs
between the wire feed rollers and
into the middle wire tube.