Konica Minolta AccurioPress C14000 Watkiss PowerSquare 224 Offline User Manual - Page 57
Message, Information, Reference, ERROR - No Comms
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
5 - Error Conditions, Problems and Solutions - Message List Message Information Reference Endlay axis moving The endlay axis (size adjustment) is moving. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. ENDLAY - No comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. ERROR IN TRIM AREA There is an error at the trimmer. Check the trimmer for a paper or book jam. See "Jam in the Trim Area" on page 62. Touch STOP to clear the message from the screen. ERROR - No Comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. FLOW ERROR FORMER There is an error at the former. Open the folder cover and remove the book. If necessary, open the main deck to remove the book. See "Jam in the Folder or Former Area" on page 59. FLOW ERROR - OUTFEED There is an error at the outfeed. Remove the trim bin and open the trim stop guard to remove the book. See "Jam in the Trim Area" on page 62. If necessary, open the main deck to remove the book. FLOW ERROR STITCHER There is an error at the stitcher. See "Jam in the Open the folder cover and remove Stitch Area" on the book. page 59. If the problem continues, then call your service engineer. Fold blade axis moving The fold blade axis (book thickness adjustment) is moving. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. Watkiss PowerSquare™224 User Manual 53