Konica Minolta AccurioPress C14000 Watkiss PowerSquare 224 Offline User Manual - Page 62

TRIM BLADE NOT, Trim Bin

Get Konica Minolta AccurioPress C14000 PDF manuals and user guides View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

5 - Error Conditions, Problems and Solutions - Message List Message Trim axis moving TRIM BIN OPEN TRIM BLADE NOT PARKED TRIM - No comms USER STOP Information Reference The trim axis (size adjustment) is moving. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. The trim bin is not fitted or is not contacting the safety switch. Fit the trim bin. See "Empty the Trim Bin" on page 32. The trim blade is in the wrong position. Touch START to reset the position. Follow the instructions on the screen. Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. The user has touched the STOP button while the machine is in operation. Touch START to restart the machine. 58 Watkiss PowerSquare™224 User Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
5 - Error Conditions, Problems and Solutions - Message List
58
Watkiss PowerSquare™224 User Manual
Trim axis moving
The trim axis (size adjustment) is
moving. This message clears
when the adjustment is complete.
If the message does not clear,
touch
ADVANCED
>
RE-REF
.
TRIM BIN OPEN
The trim bin is not fitted or is not
contacting the safety switch. Fit
the trim bin.
See “Empty the
Trim Bin” on
page 32.
TRIM BLADE NOT
PARKED
The trim blade is in the wrong
position. Touch START
to reset
the position.
Follow the instructions on the
screen.
TRIM - No comms
Use the mains ON/OFF switch.
Turn the machine OFF, then turn
the machine ON.
If the problem
continues, then call your service
engineer.
USER STOP
The user has touched the STOP
button while the machine is in
operation. Touch START
to
restart the machine.
Message
Information
Reference