Konica Minolta Fujitsu fi-6400 Operation Guide - Page 106

Chapter 7 Troubleshooting Temporary Errors The following are lists of temporary errors which can be recovered by operators. ■ Paper feeding errors Error codes beginning with the letter "J" are displayed. Error code Error message Countermeasure J1:31 J1:32 J1:34 J1:35 J1:3A J1:3B J1:3C J1:3D J1:3E Paper jam Remove the document and try again. 1 Remove the jammed document(s). For information on how to remove documents, refer to "7.1 Paper Jam" (page 103). 2 Check if the documents are suitable for scanning by ADF. For more details, refer to "2.2 Documents for Scanning" (page 37). 3 Clean the rollers. For more details, refer to "Chapter 5 Daily Care" (page 81). Error code Error message Countermeasure J1:50 Paper jam Remove the document and try again. 1 Remove the jammed document(s). For information on how to remove documents, refer to "7.1 Paper Jam" (page 103). 2 Check if the documents are suitable for scanning by ADF. For more details, refer to "2.2 Documents for Scanning" (page 37). J0:51 Paper jam Remove the document and try again. 1 Remove the jammed document(s). For information on how to remove documents, refer to "7.1 Paper Jam" (page 103). 2 Check if any bent/warped documents or thin papers that do not meet the specification are mixed in the batch. For more details, refer to "2.2 Documents for Scanning" (page 37). TOP Contents Index Introduction Scanner Overview How to Load Documents How to Use the Operator Panel Various Ways to Scan Daily Care Replacing Consumables Troubleshooting Operational Settings Appendix Glossary 106