Konica Minolta Fujitsu fi-6400 Operation Guide - Page 121

Chapter 7 Troubleshooting Vertical streaks appear on the scanned image. Do the vertical streaks (lines) always appear in the same location? No Does the vertical streak (line) disappear when you set a lower resolution? No Is there any foreign matter (e.g. dust, paper dust) on the document? Clean the glasses and rollers inside the ADF. For information on how to clean the glasses and each roller inside the ADF, refer to Yes "5.2 Cleaning the ADF (with Cleaning Sheet)" (page 84) or "5.3 Cleaning the ADF (with cloth)" (page 86). Specify a lower resolution and scan the document. Yes Remove any foreign matter off the document. Such foreign matter on the document may be transferred onto the glasses inside Yes the ADF and cause the images to become dirty. No If the above countermeasures do not solve the problem, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 128) first, then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. TOP Contents Index Introduction Scanner Overview How to Load Documents How to Use the Operator Panel Various Ways to Scan Daily Care Replacing Consumables Troubleshooting Operational Settings Appendix Glossary 121