Konica Minolta Fujitsu fi-6400 Operation Guide - Page 153

Chapter 8 Operational Settings Specifying a Color to Drop Out [Dropout color] By using the "Dropout Color" function, you can scan documents with the specified color removed from the light's three primary colors which are red, green, and blue. For instance, when you scan a document containing black text with a green background, you can output an image of black text only.  Dropout colors can only be specified in black & white or grayscale mode.  Dropout works best with light (low intensity) colors, and dark colors may not drop out. 1 Start up the Software Operation Panel. Refer to "8.1 Starting Up the Software Operation Panel" (page 132). 2 From the listing on the left, select [Device Setting 2]  [Dropout color]. 3 Select a color to drop out. Red, Green, Blue: Red, green, or blue is dropped out. None: No color is dropped out. When connected via SCSI or USB connector, the Software Operation Panel allows you to select colors from red, green, and blue only. To drop out other colors, configure the settings in the scanner driver. For details, refer to the scanner driver's Help.  This setting can also be configured from the scanner driver's setup dialog box. Note that priority is given to the scanner driver setting.  This setting does NOT appear when Kofax VRS (optional) is used. TOP Contents Index Introduction Scanner Overview How to Load Documents How to Use the Operator Panel Various Ways to Scan Daily Care Replacing Consumables Troubleshooting Operational Settings Appendix Glossary 153