Konica Minolta Fujitsu fi-6400 Operation Guide - Page 107

Chapter 7 Troubleshooting Error code Error message Countermeasure J0:52 Paper jam Remove the document and try again. 1 Remove the jammed document(s). For information on how to remove documents, refer to "7.1 Paper Jam" (page 103). 2 Check if the documents are suitable for scanning by ADF. For more details, refer to "2.2 Documents for Scanning" (page 37). 3 Clean the rollers. For more details, refer to "Chapter 5 Daily Care" (page 81). J3:54 Skew detected Remove the document and try again. 1 Remove the jammed document(s). For information on how to remove documents, refer to "7.1 Paper Jam" (page 103). 2 Make sure that the hopper side guides are not set too wide. Error code Error message Countermeasure J2:55 Multifeed detected (Overlap) Press the iMFF button to eject the document and to suppress multifeed detection from next scans. Press the Eject button just to eject the document. When [Ready] is displayed, increase the paper separation force by using the [] button to suppress multifeeds. (*1) When you press the [Eject] button on the operator panel, the multifed documents are ejected. Multifeed detected (Overlap) Press the Eject button to eject the document. When [Ready] is displayed, increase the paper separation force by using the [] button to suppress multifeeds. (*1) TOP Contents Index Introduction Scanner Overview How to Load Documents How to Use the Operator Panel Various Ways to Scan Daily Care Replacing Consumables Troubleshooting Operational Settings Appendix Glossary 107