Konica Minolta Fujitsu fi-6400 Operation Guide - Page 126

Chapter 7 Troubleshooting Scanned images turn out elongated. Are the rollers dirty? Clean the rollers. For more information on cleaning, refer to "5.2 Cleaning the ADF (with Cleaning Yes Sheet)" (page 84) or "5.3 Cleaning the ADF (with cloth)" (page 86). No Does the condition of the documents fulfill the requirements described in "Precautions" in "Paper Quality" (page 37)? Use a document that satisfies the required conditions. For more details, refer to "2.2 Documents for Scanning" (page 37). No Yes Are any of the consumables (*1) worn out? Check the consumable counters. Replace the consumables if necessary. For information on how to replace consumables, refer to "Chapter 6 Replacing Yes Consumables" (page 93). No Have you adjusted [Offset/Vertical Magnification Adjustment]? In [Hardware Setting] of the Software Operation Panel, adjust the scan scale in the feeding direction. No For more details, refer to "Adjusting the Starting Position for Scanning [Offset/ Vertical Magnification Adjustment]" (page 149). Yes If the above countermeasures do not solve the problem, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 128) first, then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. *1: "Consumables" refers to the pick roller, separator roller and brake roller. TOP Contents Index Introduction Scanner Overview How to Load Documents How to Use the Operator Panel Various Ways to Scan Daily Care Replacing Consumables Troubleshooting Operational Settings Appendix Glossary 126