Konica Minolta bizhub 20 bizhub 20 Software User Guide - Page 207
Network Scanning, Before using Network Scanning
View all Konica Minolta bizhub 20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
11 Network Scanning 11 If you want to scan from the machine on a network, you must choose the networked machine in the Device Selector application located in Macintosh HD/Library/Printers/KONICA MINOLTA/Utilities/DeviceSelector or from the Model pop-up menu in the main screen of ControlCenter2. If you already installed the Multi-Function Suite Software following the network installation steps in the Quick Guide then this selection should already be made. To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can set or change the address settings from the control panel. (See Control Panel Setup in the Network User's Guide.) Note For network scanning, a maximum 25 of clients can be connected to one machine on a network. For example, if 30 clients try to connect at a time, 5 clients will not be shown on the LCD. Before using Network Scanning 11 Configuring network scanning 11 a From Library, choose Printers, KONICA MINOLTA, Utilities and DeviceSelector, and then double- click Device Selector. The Device Selector window appears. This window can also be opened from ControlCenter2. For more information, see Using ControlCenter2 on page 179. b Specify your machine by IP address or mDNS service Name. To change the IP address, enter the new IP address. You can also choose a machine from the list of the available machines. Click Browse to 11 show the list. c Click OK. 199