Kyocera ECOSYS P2040dw ECOSYS M2635dw/M2040dn/M2540dw/M2640idw/P2040dw/P2235dw - Page 55
Scaling, Setting Scaling on the Gutter, Creating a Gutter
View all Kyocera ECOSYS P2040dw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Scaling Gutter Layout 2 In the Pages per sheet list, select the number of pages to print on each sheet of paper. 3 In the Layout list, select the direction the pages should flow. 4 If you want to print a border around each page, select Print borders. 5 Click OK to return to the Print dialog box. 6 Click OK to start printing. Scaling increases or decreases text and graphics on a page. You can also select a gutter setting that enlarges the margins to accommodate manual stapling or manual hole punch. If other Layout tab options are selected, Scaling is unavailable. Setting Scaling on the Page 1 In the Layout tab, type or select a scaling percentage from 20 to 500. 2 Click OK to return to the Print dialog box. 3 Click OK to start printing. Gutter increases the margins around your text and graphics on the left side and at the top of the printed sheet. Gutter is often used for binding, hole punch, or stapling to make a print job easier to read. This creates a larger margin space by shifting the printable area to the right, or down, as much as one inch (25.4 mm). Gutter width displays the unit of measurement in inches or millimeters. You can change the Units setting in the User Settings dialog box, accessed from Device Settings. Creating a Gutter 1 In the Layout tab, click Gutter. 2 Under Gutter width, type or select a value between 0.20 to 1.00 inches (5.0 to 25.4 mm). Short edge (top) This selection modifies the outside margin on the top edge of the page. Long edge (left) Printer Driver 6-2