Kyocera FS-C5350DN FS-C5350DN Operation Guide (Advanced) - Page 51
Private/Stored Printing a private print/stored job
View all Kyocera FS-C5350DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
>Report Delete 3 Press V repeatedly until Delete appears below the title. >Private/Stored ?Harold >Arlen ?Agenda 4 Press [OK]. The message Processing appears and the stored job is deleted. Private/Stored (Printing a private print/stored job) In private printing, you can specify that a job is not printed until you release the job from the operation panel. When sending the job from the application software, specify a 4-digit access code in the printer driver. The job is released for printing by entering the access code on the operation panel ensuring confidentiality of the print job. In the stored job mode, access codes are not mandatory, but can be set on the printer driver if printing with PIN security is required. Then, the access code must be entered on the operation panel to print a stored job. Print data will be stored in the hard disk/RAM disk after printing. Refer to KX Printer Driver User Guide for the driver settings. Releasing a Private/Stored Job 1 Press Z while Job Box > is displayed. 2 Press U or V repeatedly until >Private/Stored appears. The name entered in the printer driver (Harold, in this example) also appears. 3 Press [OK]. A blinking question mark (?) appears before the user name. 4 Press U or V to display the desired user name (Arlen, in this example). 5 Press [OK]. The user name and the job name (Agenda, in this example) entered in the printer driver appear with a blinking question mark (?). 6 Press U or V to display the desired job title. Note If you selected All Files, this process is applied to all the documents in the Private/Stored Job. >Agenda ID >Agenda Copies 0000 001 7 Press [OK]. The ID input line appears. Enter the four-digit access code entered in the printer driver and press [OK]. To enter the ID, press Y or Z to move the cursor to the number to be changed and then enter the correct number by pressing U or V. IMPORTANT If you selected All Files and the stored access code does not match any of the documents, or if no access codes was specified, ID error is displayed. 8 You can set the number of copies to be printed. To increase the copy count, press U; to decrease the copy count, press V. Note If you selected All Files, press U after Copies --- is displayed to set the number of copies. Using the Operation Panel 2-27