Kyocera FS-C5350DN FS-C5350DN Operation Guide (Advanced) - Page 57

Cassette (1 to 4) Size (Setting the cassette paper size) To set the standard sizes A5, A4, B5, Letter, and Legal size for the paper cassette, load the paper and turn the paper size dial so that the size of the paper you are going to use appears in the paper size window. To load a non-standard paper size (sizes other than A5, A4, B5 and Letter) into a paper cassette, refer to the custom paper sizes listed on page 2-33. If the PF-500 or PF-510 optional paper feeder is installed, use the same procedure to load paper into the paper feeder cassettes. 1 Pull the cassette out of the printer and set the paper size using the paper size dial. A4 Paper Size Dial 2 Adjust the paper guides in the cassette to the size of the paper to be used for printing and load the paper into the cassette. Custom Paper Size If you use a non-standard size paper, load the paper and turn the paper size dial to Other (refer to Loading Paper on page 1-14). Selecting the Size Dial Setting 1 Pull the cassette out of the printer and set the paper size dial to Other. For details, refer to step 1 in Cassette (1 to 4) Size (Setting the cassette paper size) on page 2-33. 2 Adjust the paper guides in the cassette to the size of the paper to be used for printing and load the paper into the cassette. >Cassette Size > ? Custom Setting the Paper Size from the Operation Panel Use the operation panel to set the size of paper loaded in the cassette on the printer. This menu appears if the size dial for the cassette is set to Other. 1 Press Z while Paper Settings > is displayed. 2 Press U or V repeatedly until >Cassette Size > appears. If optional paper feeders are added, Cassette1 Size will appear for the standard paper cassette and Cassette2 Size, Cassette3 Size, and Cassette4 Size will appear for the optional paper feeders. 3 Press [OK]. A blinking question mark (?) appears. 4 Press U or V to display the desired paper size. The message display toggles through the following paper sizes: Env. Monarch Envelope #10 Envelope #9 Envelope #6 Envelope DL Using the Operation Panel 2-33