Kyocera KM-2030 Printing System (K) Instruction Handbook (Setup Edition) - Page 12
<20 ppm copier>
View all Kyocera KM-2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
* To cancel the setting midway through it, press the Stop/Clear key. 1 Press the Printer key. The machine will switch to the printer mode. 2. Set-up 6 Use the M and N cursor keys to select "On" and then press the Enter key. 2 Use the M and N cursor keys to select "MENU" and then press the Enter key. 7 Use the M and N cursor keys to select "Change #" and then press the Enter key. 3 Use the M and N cursor keys to select "Interface" and then press the Enter key. 8 Use the M and N cursor keys to select "DHCP" and then press the Enter key. 4 Use the M and N cursor keys to select "Option" and then press the Enter key. 9 Use the M and N cursor keys to select "Off" and then press the Enter key. 5 Use the M and N cursor keys to select "TCP/IP" and then press the Enter key. 10 Use the M and N cursor keys to select "IP Address" and then press the Enter key. 7