Lenovo NetVista Hardware Maintenance Manual (HMM) for NetVista 6832 and 6833 s - Page 119
Replacing the Cover, hooks inside the cover fit over the bottom ledge
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
• Touch the bare metal frame of the system to dissipate any static electricity from your body (do not touch any of the components inside the frame until you have done this). Do not touch any component(s) with a voltage warning label. NOTE: Replacing the Cover • To replace the tower cover, lower the cover down over the tower, pressing in on the sides so the hooks inside the cover fit over the bottom ledge of the tower. Slide the cover forward into place. Secure the tower cover by replacing the screws you removed. CAUTION: When you replace the cover, there are hooks inside the cover that help fit it to the tower. General Information 87
General Information
87
•
Touch the bare metal frame of the system to
dissipate any static electricity from your body (do
not touch any of the components inside the frame
until you have done this). Do not touch any
component(s) with a voltage warning label.
NOTE:
Replacing the Cover
•
To replace the tower cover, lower the cover down
over the tower, pressing in on the sides so the
hooks inside the cover fit over the bottom ledge of
the tower. Slide the cover forward into place.
Secure the tower cover by replacing the screws
you removed.
CAUTION:
When you replace the cover, there are
hooks inside the cover that help fit it to the
tower.