Lenovo NetVista Hardware Maintenance Manual (HMM) for NetVista 6832 and 6833 s - Page 51
Local Bus IDE Adapter, Serial Port A, Parallel Port, Base I/O Address, Interrupt, DMA Channel
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Local Bus IDE Adapter The available options are Both, Disabled, Primary and Secondary. The default is Both. Serial Port A The available options are Auto, Disabled and Enabled. The default is Auto. Parallel Port The available options are Enabled, Auto and Disabled. The default is Enabled. Base I/O Address The available options are 378, 278, and 3BC. The default is 378. Interrupt The available options are IRQ7 and IRQ 5. The default is IRQ7. Mode The available options are ECP, Output Only, Bidirectional and EPP. The default is ECP. DMA Channel The available options are DMA3 and DMA1. The default is DMA3. Floppy Disk Controller The available options are Enabled, Disabled and Auto. The default is Enabled. Base I/O Address The available options are Primary and Secondary. The default is Primary. Audio The available options are Enabled and Disabled. The default is Enabled. PCI Device, Slot #1/Slot #2/Slot #3 This sub-menu shows information of Option ROM Scan, Enable Master, and latency Timer. General Information 19