Lenovo NetVista Hardware Maintenance Manual (HMM) for NetVista 6832 and 6833 s - Page 71
Error Symptoms, Action/FRU, Error Codes, or Beeps
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Error Symptoms Action/FRU Incorrect memory size shown or repeated during POST. 1. Insert the memory modules in the RIMM sockets properly, then reboot the system. 2. Memory module. See "005 -" on page 59 to replace memory module. 3. System board. System works but fails to enter power saving mode when the Power Management Mode is set to [Enabled], and power saving timer set in BIOS has elapsed. 1. Enter Configuration/ Setup Utility and load default settings. 2. In Windows ME or Windows 2K, check settings in Power Management Property of Control Panel. 3. Reload software from Recovery CD. System hangs before system boot. 1. See "Index of Symptoms, Messages, Error Codes, or Beeps" on page 32. 2. See "Undetermined Problems" on page 68 System hangs after system boot. 1. Execute a system test ("Diagnostics / All Tests" in PC-Doctor diagnostics program) and set it to stop at "Halt on Error" to see the potential cause of the problem. 2. "Undetermined Problems" on page 68. Blinking cursor only; system does not work. 1. See "Start" on page 27. 2. Diskette/IDE drive connection/cables 3. Diskette/IDE disk drives 4. See "Undetermined Problems" on page 68 5. System board Check Procedures 39