Lenovo ThinkPad 390X User's Reference: ThinkPad 390X - Page 121
Using a PC Card with the Port Replicator, Using the Network Feature in the Port Replicator
View all Lenovo ThinkPad 390X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Hints, Tips and Limitations OS/2 DOS WIN 3.1 For OS/2 Warp: Hibernation is not supported. If you receive incoming faxes or mail under OS/2, you must set the modem settings in the fax application to one of the following: Hardware FIFO enabled Hardware Flow Control on UART 16550A modem In OS/2 FaxWorks for example, select Utilites, Settings, Modem Type, and H/W FIFO (16650A). If you do not set your modem to one of these settings, you will not be able to receive an incoming fax. For DOS and Windows 3.11: Hibernation is not supported if OS/2 Boot Manager is installed. Using a PC Card with the Port Replicator In the Windows NT, Windows 3.11 or DOS environment, you need to install the PC Card support software after docking your computer to the port replicator. If you have already installed the PC Card support software, uninstall it and then reinstall it after you dock your computer to the replicator. Using the Network Feature in the Port Replicator When you dock your computer to the ThinkPad Port Replicator with Advanced Etherjet Feature, do as follows: 1. Click Start. 2. Move the cursor to Settings; then click Control Panel. 3. Double-click System. 4. Click the Device Manager tab. 5. Expand the Network adapters item by clicking it. 6. Double-click the Intel 8255X-based PCI Ethernet Adapter (10/100) item. Solving Computer Problems 105