Lenovo ThinkPad 390X User's Reference: ThinkPad 390X - Page 68
Increasing Memory
View all Lenovo ThinkPad 390X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Customizing the TrackPoint Increasing Memory Increasing memory capacity is an effective way to make programs run faster. You can increase the amount of memory in your computer by installing a dual inline memory module (DIMM), available as an option. Different capacities of DIMM are available. You can install DIMMs directly in the memory slots on the bottom of the computer. Your computer memory capacity can be expanded up to 256 MB (two 128 MB DIMM options). Note: Base memory (32 MB or 64 MB) occupies one DIMM slot. Attention: The ThinkPad 390X computer supports the PC-100 static dynamic random access memory (SDRAM) card only. It does not support the enhanced data output dynamic random access memory (EDO DRAM) card. If you install a DIMM that is not supported by your computer, an error code might appear when the system starts. The appropriate memory option can be purchased through your IBM reseller or IBM marketing representative. To install the DIMM, do the following: 1. Power off the computer; then disconnect the AC Adapter and all cables from the computer. 2. Close the LCD, turn the computer over, and then remove the battery pack. 3. Loosen the screw on the memory slot cover; then remove the cover. 52 ThinkPad 390X User's Reference