Lenovo ThinkPad Yoga 11e (English) User Guide - Page 99

Errors without messages, 2200: Machine Type and Serial Number are invalid.

Page 99 highlights

• Message: 0189: Invalid RFID configuration information area Solution: The EEPROM checksum is not correct (block # 4 and 5). The system board should be replace, and the UUID needs to be reinstalled. Have the computer serviced. • Message: 0190: Critical low-battery error Solution: The computer turns off because the battery is low. Connect the ac power adapter to the computer and charge the battery. • Message: 0191: System Security - Invalid remote change requested Solution: The system configuration change has failed. Confirm the operation and try again. To clear the error, enter ThinkPad Setup. • Message: 0199: System Security - Security password retry count exceeded. Solution: This message is displayed if you enter a wrong supervisor password more than three times. Confirm the supervisor password and try again. To clear the error, enter ThinkPad Setup. • Message: 1802: Unauthorized network card is plugged in - Power off and remove the network card. Solution: The wireless network card is not supported on this computer. Remove it. • Message: 2100: Detection error on HDD0 (Main HDD) Solution: The hard disk drive or solid-state drive is not working. Have the hard disk drive or solid-state drive serviced. • Message: 2110: Read error on HDD0 (Main HDD) Solution: The hard disk drive or solid-state drive is not working. Have the hard disk drive or solid-state drive serviced. • Message: 2200: Machine Type and Serial Number are invalid. Solution: Machine Type and Serial Number are invalid. Have the computer serviced. • Message: 2201: Machine UUID is invalid. Solution: Machine UUID is invalid. Have the computer serviced. • Message: Fan error Solution: Cooling fan has failed. Shut down the computer immediately and have the computer serviced. • Message: Thermal sensing error Solution: The thermal sensor has a problem. Shut down the computer immediately and have the computer serviced. Errors without messages • Problem: My screen keeps blanking when I do not want it to. Solution: - If your computer is preinstalled with the Windows 7 operating system, you can disable any system timers, such as the LCD turn-off timer or the blank timer by doing the following: 1. Start the Power Manager program. 2. Click the Power plan tab, and then select Maximum Performance from the predefined power plans. Chapter 7. Troubleshooting problems 83

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160

Message
: 0189: Invalid RFID configuration information area
Solution
: The EEPROM checksum is not correct (block # 4 and 5). The system board should be replace,
and the UUID needs to be reinstalled. Have the computer serviced.
Message
: 0190: Critical low-battery error
Solution
: The computer turns off because the battery is low. Connect the ac power adapter to the
computer and charge the battery.
Message
: 0191: System Security - Invalid remote change requested
Solution
: The system configuration change has failed. Confirm the operation and try again. To clear the
error, enter ThinkPad Setup.
Message
: 0199: System Security - Security password retry count exceeded.
Solution
: This message is displayed if you enter a wrong supervisor password more than three times.
Confirm the supervisor password and try again. To clear the error, enter ThinkPad Setup.
Message
: 1802: Unauthorized network card is plugged in - Power off and remove the network card.
Solution
: The wireless network card is not supported on this computer. Remove it.
Message
: 2100: Detection error on HDD0 (Main HDD)
Solution
: The hard disk drive or solid-state drive is not working. Have the hard disk drive or solid-state
drive serviced.
Message
: 2110: Read error on HDD0 (Main HDD)
Solution
: The hard disk drive or solid-state drive is not working. Have the hard disk drive or solid-state
drive serviced.
Message
: 2200: Machine Type and Serial Number are invalid.
Solution
: Machine Type and Serial Number are invalid. Have the computer serviced.
Message
: 2201: Machine UUID is invalid.
Solution
: Machine UUID is invalid. Have the computer serviced.
Message
: Fan error
Solution
: Cooling fan has failed. Shut down the computer immediately and have the computer serviced.
Message
: Thermal sensing error
Solution
: The thermal sensor has a problem. Shut down the computer immediately and have the
computer serviced.
Errors without messages
Problem
: My screen keeps blanking when I do not want it to.
Solution
:
If your computer is preinstalled with the Windows 7 operating system, you can disable any system
timers, such as the LCD turn-off timer or the blank timer by doing the following:
1. Start the Power Manager program.
2. Click the
Powerplan
tab, and then select
MaximumPerformance
from the predefined power
plans.
Chapter 7
.
Troubleshooting problems
83