Lenovo ThinkStation P900 (English) User Guide - ThinkStation P900 (type 30A4 a - Page 108
Removing and installing a device in an optical drive bay
View all Lenovo ThinkStation P900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
To reinstall the direct cooling air baffle, do the following: 1. Align the plastic boards on the top and bottom sides of the direct cooling air baffle with the small gaps 1 in the chassis. Ensure that the handle of the direct cooling air baffle faces towards the front of the chassis. 1 Figure 32. Aligning the plastic boards with the small gaps 2. Slide the direct cooling air baffle into the chassis until it is secured firmly. Note: If necessary, adjust the position of the direct cooling air baffle slightly to avoid any interference with other components in the chassis. What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the installation or replacement, go to "Completing the parts replacement" on page 125. Removing and installing a device in an optical drive bay Attention: Do not open your computer or attempt any repair before reading and understanding the "Read this first: Important safety information" on page v. Depending on your computer model, the following devices might be installed in the optical drive bays: 96 ThinkStation P900 User Guide