Lenovo ThinkStation P900 (English) User Guide - ThinkStation P900 (type 30A4 a - Page 119
Pivot the tab, Align the notch
View all Lenovo ThinkStation P900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
6. Align the notch 1 on the new flex adapter with the slot key 2 in a flex adapter slot. Then, slide the plastic retainer of the new flex adapter downward into the corresponding slot in the multi-function bracket. Then, insert the adapter into the flex adapter slot until it is secured tightly. Notes: • Do not touch the circuit board of the flex adapter. • Ensure that you install the flex adapter only into a flex adapter slot. Do not install the flex adapter into a PCI or PCI Express card slot. 1 2 Figure 45. Installing the flex adapter 7. Pivot the tab 1 downward until it snaps into position. Ensure that the latch inside the multi-function bracket is closed. 1 Figure 46. Closing the card latch 8. If a device only works with its cable connected to the flex adapter, connect the cable to the new flex adapter. Chapter 9. Installing or replacing hardware 107