Lenovo ThinkStation P900 (English) User Guide - ThinkStation P900 (type 30A4 a - Page 109
If you remove a flex module or a front-access storage enclosure, you might need to disconnect
View all Lenovo ThinkStation P900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
• Optical drive • Front-access storage enclosure • Flex module Note: The flex module might be installed with the following: - IEEE 1394 connector - eSATA connector - 29-in-1 card reader - Slim optical drive To remove and install a flex module and a front-access storage enclosure, follow the steps of removing and installing an optical drive. To remove an optical drive, do the following: 1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer. 2. Remove the computer cover. See "Removing the computer cover" on page 77. 3. Remove the direct cooling air baffle. See "Removing and reinstalling the direct cooling air baffle" on page 94. 4. Locate the optical drive bay from which you want to remove an optical drive. See "Locating internal drives" on page 7. 5. Disconnect the cables from the optical drive. Note: If you remove a flex module or a front-access storage enclosure, you might need to disconnect the cables from the device, a PCI card, or the system board. See "Locating parts on the system board" on page 5. 1. Press the tab 1 downward and push the optical drive to the front of the chassis. Then, remove the optical drive from the front of the chassis. 1 Figure 33. Removing the optical drive To install an optical drive, do the following: 1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer. 2. Remove the computer cover. See "Removing the computer cover" on page 77. 3. Remove the direct cooling air baffle. See "Removing and reinstalling the direct cooling air baffle" on page 94. Chapter 9. Installing or replacing hardware 97