Lexmark 9575 User's Guide - Page 78
Loading transparencies in Tray 1, Loading iron-on transfers in Tray 1
UPC - 734646041348
View all Lexmark 9575 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
3 The paper guides rest against the left, right, and bottom sides of the cards. Note: Photo cards require more drying time. Remove each photo as it exits, and allow it to dry to avoid ink smudging. Loading transparencies in Tray 1 You can load up to 50 transparencies at a time. 1 Load transparencies with the rough side facing down. 2 If the transparencies have a removable strip, each strip should face down. 3 Make sure: • You load letter- or A4-size transparencies. • You remove any paper backing sheets from the transparencies before loading. • The paper guides rest against the left, right, and bottom edges of the transparencies. Notes: • Transparencies with paper backing sheets are not recommended. • Transparencies require more drying time. Remove each transparency as it exits, and allow it to dry to avoid ink smudging. Loading iron-on transfers in Tray 1 You can load up to 10 iron-on transfers into the paper tray at once, but you will achieve best results loading them one at a time. 1 Load iron-on transfers with the print side of the transfer facing down. 2 Make sure: • You follow the loading instructions that came with the iron-on transfers. • The paper guides rest against the left, right, and bottom edges of the transfers. Loading custom-size paper in Tray 1 You can load up to 25 sheets of custom-size paper at a time. 1 Load paper into the paper tray with the printable side facing down. 2 Make sure: • The paper size fits within these dimensions: Width: - 76.0-216.0 mm - 3.0-8.5 inches Length: - 127.0-432.0 mm - 5.0-17.0 inches • The paper guides rest against the left, right, and bottom edges of the paper. Loading paper and original documents 78