Lexmark C720 Setup Guide - Page 37

Installing a hard disk, system board

Get Lexmark C720 PDF manuals and user guides View all Lexmark C720 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Installing a hard disk You can purchase a hard disk option from Lexmark. You must assemble the hard disk option and attach it to the system board. If you use a third-party hard disk, it must meet the following criteria: • 2.5-inch platter • ATA-2 (IDE) interface • Maximum thickness of 13 mm (0.51 in.) • 3.2GB minimum hard disk capacity • 10GB maximum hard disk capacity You need a number 2 Phillips screwdriver to attach the hard disk to the mounting plate. Warning! System board electrical components are easily damaged by static electricity. Touch something metal before you touch any system board electronic components or connectors. Attachment screws Ribbon cable 1 Complete the steps in "Removing the system board" on page 23 if the system board is still installed. Place the system board on a flat, level, and stable surface. 2 Remove the mounting plate, hard disk, ribbon cable, and attachment screws from the package. Mounting plate Hard disk Install memory and network options 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
33
Install memory and network options
Installing a hard disk
You can purchase a hard disk option from Lex-
mark. You must assemble the hard disk option
and attach it to the system board.
If you use a third-party hard disk, it must meet the
following criteria:
•
2.5-inch platter
•
ATA-2 (IDE) interface
•
Maximum thickness of 13 mm (0.51 in.)
•
3.2GB minimum hard disk capacity
•
10GB maximum hard disk capacity
You need a number 2 Phillips screwdriver to
attach the hard disk to the mounting plate.
Warning!
System board electrical com-
ponents are easily damaged by static
electricity. Touch something metal before
you touch any system board electronic
components or connectors.
1
Complete the steps in
“
Removing the
system board
”
on page 23 if the system
board is still installed.
Place the system board on a flat, level, and
stable surface.
2
Remove the mounting plate, hard disk,
ribbon cable, and attachment screws from
the package.
Mounting plate
Attachment screws
Ribbon cable
Hard disk