Lexmark C720 Setup Guide - Page 48
Remove the top access panel., Pry outward on the rear tab covers and, remove them.
View all Lexmark C720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Note: If you are installing the duplex unit after initial printer setup, you must have previously installed an optional drawer. Top access panel 3 Remove the top access panel. Push in on the bottom edge of the top access panel. Then lift upward to remove it. 4 Pry outward on the rear tab covers and remove them. You may need to use a small flathead screwdriver to remove the rear tab covers. Tabs 44 Install the optional duplex unit
44
Install the optional duplex unit
Note:
If you are installing the duplex
unit after initial printer setup, you must
have previously installed an optional
drawer.
3
Remove the top access panel.
Push in on the bottom edge of the top access
panel. Then lift upward to remove it.
4
Pry outward on the rear tab covers and
remove them.
You may need to use a small flathead screw-
driver to remove the rear tab covers.
Top access panel
Tabs