Lexmark C720 Setup Guide - Page 39
Rotate the hard disk and mounting plate as, shown to align the three posts on
View all Lexmark C720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
System board connector 8 Align the connector on the ribbon cable with the connector pins on the system board. 9 Press the hard disk cable connector onto the system board connector. Hard disk connector Note: If the holes on the mounting plate do not align with the holes on the system board, the mounting plate has been incorrectly installed on the hard disk. Refer to step 5 on page 34 for proper mounting plate installation. 10 Rotate the hard disk and mounting plate as shown to align the three posts on the mounting plate with the holes on the system board. Install memory and network options 35
35
Install memory and network options
8
Align the connector on the ribbon cable
with the connector pins on the system
board.
9
Press the hard disk cable connector onto
the system board connector.
Note:
If the holes on the mounting
plate do not align with the holes on the
system board, the mounting plate has
been incorrectly installed on the hard
disk. Refer to step 5 on page 34 for
proper mounting plate installation.
10
Rotate the hard disk and mounting plate as
shown to align the three posts on the
mounting plate with the holes on the sys-
tem board.
System board connector
Hard disk connector