Lexmark XC9235 User Guide - Page 179
Installing the 2 x 500- or 2500-sheet tray, CAUTION-POTENTIAL INJURY, CAUTION-SHOCK HAZARD
View all Lexmark XC9235 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
Upgrading and migrating 179 9 Reattach the connector cover. 10 Connect the power cord to the electrical outlet, and then turn on the printer. CAUTION-POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible. Installing the 2 x 500‑ or 2500‑sheet tray CAUTION-SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. CAUTION-TIPPING HAZARD: Installing one or more options on your printer or MFP may require a caster base, furniture, or other feature to prevent instability causing possible injury. For more information on supported configurations, see www.lexmark.com/multifunctionprinters. 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet, and then from the printer. 3 Unpack the tray, and then remove all packing material.