Maytag MER4351AAQ Use and Care Guide - Page 17
During, Self-C_ean, Cycle, After, Self-Cleaning
View all Maytag MER4351AAQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
3. Press the Clean pad. , "CLEAN" wfl[ flash. 4. Press the More+ or Less- pad. , "CL-M" (Medium Soft, 3 hours) is dispHayed. More* 5. Press the More+ or Less- pad to scroll through the sdfcHeaning settings. CL-H" (Heavy Soft, 4 hours) CL-M" (Medium soft, 3 hours) CL-L" (Light Soft, 2 hours) Choosing the soft HeveoHf the oven automatically programs the sdf-cHeaning time. 6. After four seconds, CLEAN, DELAY and LOCK wflHappear in the dispHayto show that the oven is set for a ddayed dean operation. The dday time is dispHayed. During the Self-C_ean Cycle When LOCK shows in the display, the door cannot be opened, To prevent damage to the door, do not force the door open when LOCK is displayed, Smoke and Smells You may see some smoke and smell an odor the first few times the oven is cleaned. This is normal and will lessen in time. Smoke may also occur if the oven is heavily soiled or if a broiler pan was left in the oven. Sounds As the oven heats, you may hear sounds of metal parts expanding and contracting. This is normal and will not damage the oven. After Self-Cleaning About one hour after the end of the self-clean cycle, "LOCK" will turn off. The door can then be opened. The door can then be opened. Move door lock lever to the left to unlock. Jf the oven has already been set for a clean cycle and you wish to set a delay: Some soil may leave a light gray, powdery ash. Remove it with a damp cloth. If soil remains after wiping, that means the clean cycle was not long enough. The soil will be removed during the next clean cycle. 1. Press the DeHaypad. , "DELAY" flashes. , 00:00 will appear in the display. if oven racks were left in the oven and do not slide smoothly after a clean cycle, wipe racks and rack supports with a small amount of vegetable oil to make them easier to m...o..ve. 2. Press the More+ or Less- pad to set the amount of time you want to delay the cycle. Fine lines may appear in the porcelain becaase it went throagh heating and cooling, This is normal and will not After four seconds, CLEAN, DELAY and LOCK will appear affect performance, in the display to show that the oven is set for a delayed clean operation. The delay time is displayed. A white discoloration may appear after cleaning if acidic or sugary foods were not wiped up before the self-clean Whoa the Seif-Oleaa cycle starLs: ° "DELAY" will turn off, cycle, This discoloration is normal and will not affect performance, ° The clean time will appear in the display. To cancel the Serf-Clean cycle: Press the CANCEL pad. , All words disappear from the display. , All functions are canceled. , The time of day appears in the display. , If the oven door is left open, "DOOR" will flash in the display and a signal will beep until the door is closed and the Clean pad is pressed again. , The oven door will be damaged if the oven door is forced to open when "LOCK" is still displayed. 16