Netgear WG111v3 WG111v3 User Manual - Page 14

NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v3 User Manual In general, wireless devices can communicate through walls. However, if the walls are constructed with concrete, or have metal, or metal mesh, the effective range will decrease if such materials are between the devices. What Is in the Box The product package should contain the following items: • NETGEAR 54 Mbps Wireless USB2.0 Adapter WG111v3 • Installation Guide • Plastic cradle and fasteners to hold the WG111v3 • Resource CD, including: - The Smart Wizard Installation Assistant - This manual • Warranty and Support information card If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the carton, including the original packing materials, in case you need to return the product. Default Wireless Settings If this is a new wireless network installation, use the factory default settings to set up the network and verify wireless connectivity. If this is an addition to an existing wireless network, you need the wireless network and wireless security settings that are already defined. Your Wireless Adapter factory default basic settings are: • Network Name Service Set Identification (SSID): ANY Note: In order for the Wireless Adapter to communicate with a wireless access point or wireless adapter, all devices must be set up to use the same wireless network name (SSID). • Network Mode (Infrastructure or Ad-hoc): Infrastructure • Data security WEP, WPA2-PSK, or WPA-PSK encryption: Disabled The section below provides instructions for setting up the Wireless Adapter for basic wireless connectivity to an access point. 1-2 v1.0, March 2008