Netgear WG111v3 WG111v3 User Manual - Page 42
Profile, Network Name SSID, WPA-PSK [TKIP], Save Profile, Apply, Close, Wireless
View all Netgear WG111v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v3 User Manual b. Use the icon to open the Smart Wizard. The Settings tab displays. Figure 2-14 2. Configure the security settings. a. In the Profile field, select the profile or type in a profile name. b. In the Network Name (SSID) field select the network, or enter the SSID. Note: You will not get a wireless network connection unless the network SSID matches exactly what is configured in the access point. c. In the Security section of the screen, select WPA-PSK [TKIP]. For more information about WPA security, see the Web link to "Wireless Communications" on page B-1. 3. Save your settings in a profile. a. Click Save Profile. All the configuration settings are saved in this profile. b. Click Apply. c. Click Close to exit the Smart Wizard. 2-18 v1.0, March 2008