Netgear WG111v3 WG111v3 User Manual - Page 39
Setting up WEP Encryption Security, Profile, Network Name SSID - wireless adapter software
View all Netgear WG111v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v3 User Manual Setting up WEP Encryption Security Follow the steps below to configure WEP Encryption Security. 1. Run the WG111v3 Smart Wizard. a. Make sure that the software is installed and your wireless adapter is in the USB port in your computer. b. Use the icon to open the Smart Wizard. The Settings screen displays. Figure 2-12 2. Configure the security settings. a. In the Profile field, select the profile or type in a profile name. b. In the Network Name (SSID) field select the network, or enter the SSID. Note: You will not get a wireless network connection unless the network SSID matches exactly what is configured in the access point. c. In the Security section of the screen, select WEP. 3. Select the WEP encryption strength you will use. v1.0, March 2008 2-15