Netgear WNDR4700 User Manual - Page 125
PPPoE, Traffic Meter
View all Netgear WNDR4700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
CENTRIA WNDR4700/WNDR4720 PPPoE In the IPv6 screen, when you select PPPoE from the drop-down list, the following screen displays. The following fields are included in this screen: Login. This is usually the name that you use in your email address. For example, if your main mail account is [email protected], then you would put JerAB in this field. Some ISPs (like Mindspring, Earthlink, and T-DSL) require that you use your full email address when you log in. If your ISP requires your full email address, type it in this field. Password. Type the password that you use to log in to your ISP. Service Name. If your ISP provided a service name, enter it here. Otherwise, you can leave this field blank. Connection Mode. This specifies when the router should establish the PPPoE connection. Currently the connection mode is always on to provide a steady IPv6 connection. The router never disconnects the connection, and in case the connection is broken (such as if the modem is turned off), the router establishes the connection right after the PPPoE connection is available. The other settings are the same as Auto Detect mode. See IPv6 LAN Setup and IPv6 Filtering on page 120. Traffic Meter Traffic metering allows you to monitor the volume of Internet traffic passing through your router's Internet port. With the Traffic Meter utility, you can set limits for traffic volume, set a monthly limit, and get a live update of traffic usage. Advanced Settings 125