Netgear WNR612v2 WNR612v2 User Manual (PDF) - Page 34
Using the LAN IP Setup Options, Configuring a Device Name, Configuring LAN TCP/IP Setup Parameters - default ip
View all Netgear WNR612v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Wireless-N 150 Router WNR612v2 User Manual Using the LAN IP Setup Options The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host Configuration Protocol (DHCP) and Routing Information Protocol (RIP). To configure LAN IP settings, select LAN Setup under Advanced in the main menu. The LAN Setup screen displays. Configuring a Device Name The device name is a user-friendly name for the router. This name is shown in the Network on Windows Vista and the Network Explorer on all Windows systems. The Device Name field cannot be blank. The default name is WNR612v2. Configuring LAN TCP/IP Setup Parameters These are advanced settings that you might configure if you are a network administrator and your network contains multiple routers. The router is shipped preconfigured to use private IP addresses on the LAN side and to act as a DHCP server (see Using the Router as a DHCP Server on page 35). Note: If you change the LAN IP address of the router while connected through the browser, you will be disconnected. You must then open a new connection to the new IP address and log in again. The router's default LAN IP configuration is: • LAN IP address. 192.168.1.1 34 | Chapter 4: Customizing Your Network