Netgear XSM7224S XMS7224S CLI Manual - Page 103

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 set gvrp interfacemode This command enables GVRP on a single port (Interface Config mode) or all ports (Global Config mode). Default Format Mode disabled set gvrp interfacemode • Interface Config • Global Config no set gvrp interfacemode This command disables GVRP on a single port (Interface Config mode) or all ports (Global Config mode). If GVRP is disabled, Join Time, Leave Time and Leave All Time have no effect. Format Mode no set gvrp interfacemode • Interface Config • Global Config show gvrp configuration This command displays Generic Attributes Registration Protocol (GARP) information for one or all interfaces. Format Mode show gvrp configuration { | all} • Privileged EXEC • User EXEC Term Interface Join Timer Definition Valid slot and port number separated by forward slashes. The interval between the transmission of GARP PDUs registering (or re-registering) membership for an attribute. Current attributes are a VLAN or multicast group. There is an instance of this timer on a per-Port, per-GARP participant basis. Permissible values are 10 to 100 centiseconds (0.1 to 1.0 seconds). The factory default is 20 centiseconds (0.2 seconds). The finest granularity of specification is one centisecond (0.01 seconds). Switching Commands v1.0, November 2010 3-62