Netgear XSM7224S XMS7224S CLI Manual - Page 328

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 boot autoinstall retry-count This command is used to set the number of attempts to download a configuration. The valid range is from 1 to 6. Default Format Mode 3 boot autoinstall retry-count Privileged EXEC no boot autoinstall retry-count This command is used to reset the number to the default. The default number is 3. Format Mode no boot autoinstall retry-count Privileged EXEC Dual Image Commands The software supports a dual image feature that allows the switch to have two software images in the permanent storage. You can specify which image is the active image to be loaded in subsequent reboots. This feature allows reduced down-time when you upgrade or downgrade the software. delete This command deletes the supplied image file from the permanent storage. The image to be deleted must be a backup image. If this image is the active image, or if this image is activated, an error message displays. The optional parameter is valid only on Stacks. Error will be returned, if this parameter is provided, on Standalone systems. In a stack, the parameter identifies the node on which this command must be executed. When this parameter is not supplied, the command is executed on all nodes in a Stack. Format Mode delete [] {image1 | image2} Privileged EXEC Utility Commands 6-4 v1.0, November 2010