Netgear XSM7224S XMS7224S CLI Manual - Page 445

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Term User Name Connection From Idle Time Session Time Session Type Definition The name the user entered to log on to the system. IP address of the remote client machine or EIA-232 for the serial port connection. Time this session has been idle. Total time this session has been connected. Shows the type of session, which can be HTTP, HTTPS, telnet, serial, or SSH. User Account Commands This section describes the commands you use to add, manage, and delete system users. The 7000 series software has two default users: admin and guest. The admin user can view and configure system settings, and the guest user can view settings. Note: You cannot delete the admin user. There is only one user allowed with read/write privileges. You can configure up to five read-only users on the system. username Use this command to add a new user to the local user database. The default privilege level is 1. Using the encrypted keyword allows the administrator to transfer local user passwords between devices without having to know the passwords. When the password parameter is used along with encrypted parameter, the password must be exactly 128 hexadecimal characters in length. If the password strength feature is enabled, this command checks for password strength and returns an appropriate error if it fails to meet the password strength criteria. Giving the optional parameter override-complexity-check disables the validation of the password strength. Format Mode username password [level level] [encrypted] [overridecomplexity-check] Global Config Term Name Definition The name of the user, up to 32 characters. Management Commands v1.0, November 2010 7-29