Netgear XSM7224S XMS7224S CLI Manual - Page 170

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Example: The following shows example CLI display output for the command. (switch) #show ip dhcp snooping DHCP snooping is Disabled DHCP snooping source MAC verification is enabled DHCP snooping is enabled on the following VLANs: 11 - 30, 40 Interface --------0/1 0/2 0/3 0/4 0/6 Trusted -------- Yes No No No No Log Invalid Pkts No Yes Yes No No show ip dhcp snooping binding Use this command to display the DHCP Snooping binding entries. To restrict the output, use the following options: • Dynamic: Restrict the output based on DCHP snooping. • Interface: Restrict the output based on a specific interface. • Static: Restrict the output based on static entries. • VLAN: Restrict the output based on VLAN. Format Mode show ip dhcp snooping binding [{static/dynamic}] [interface unit/ slot/port] [vlan id] • Privileged EXEC • User EXEC Term MAC Address IP Address VLAN Interface Definition Displays the MAC address for the binding that was added. The MAC address is the key to the binding database. Displays the valid IP address for the binding rule. The VLAN for the binding rule. The interface to add a binding into the DHCP snooping interface. Switching Commands v1.0, November 2010 3-129